<![CDATA[Over adhesion to the build plate]]>When I first got the printer, I printed out a frog for the SD card and could BARELY get it off. Because of the raft that is printed when you print something from the SD card, it makes it almost impossible to get it off the build plate. I have had this same issue when printing other items without the raft.

I have started to use painter's tape to get my prints off. Does anyone have any solutions to the problem listed above?

]]>https://poloprint.net/topic/96/over-adhesion-to-the-build-plateRSS for NodeSun, 07 Jun 2026 07:57:33 GMTTue, 20 Aug 2024 21:13:47 GMT60<![CDATA[Reply to Over adhesion to the build plate on Tue, 07 Jan 2025 12:39:21 GMT]]>@Benb It helped slightly. My build plate is all scratched up from trying to get the first print off, so I still use painters tape.

]]>https://poloprint.net/post/396https://poloprint.net/post/396Tue, 07 Jan 2025 12:39:21 GMT<![CDATA[Reply to Over adhesion to the build plate on Wed, 25 Dec 2024 11:23:55 GMT]]>@DXRKRCR did this work?

]]>https://poloprint.net/post/316https://poloprint.net/post/316Wed, 25 Dec 2024 11:23:55 GMT<![CDATA[Reply to Over adhesion to the build plate on Wed, 21 Aug 2024 14:30:49 GMT]]>Thanks a bunch. Just printed the 1kg spool holder for it. I'll try that tonight.

]]>https://poloprint.net/post/238https://poloprint.net/post/238Wed, 21 Aug 2024 14:30:49 GMT<![CDATA[Reply to Over adhesion to the build plate on Wed, 21 Aug 2024 01:06:57 GMT]]>@DXRKRCR Please adjust the Z-offset to increase the gap between the nozzle and the platform. This slight adjustment will ensure that the model is easier to remove once printing is complete.

]]>https://poloprint.net/post/237https://poloprint.net/post/237Wed, 21 Aug 2024 01:06:57 GMT