@jens-uhsemann and wiibuilder2 . It should be on the sd card

@DXRKRCR well said

I tried using the AI model generator. And it really needs a lot of work. When giving it directions on the voice prompt it comes nowhere close to what I describe. And when I download pictures it too has issues with coming up correctly

@Sadie-1 they go into your collections on the very far left

@apple_user_1742513984 171cf019-1a66-43c2-8f3d-c9b1988031d7-Screenshot_20251127_105627.jpg
Which file are you referring to?

@Koralys-Torres said in Clay cutters:

What are the best setting and how to work with them to make cutters for charms.

Modeling settings

Wall thickness: 0.8 to 1.2 mm for small charm cutters.

Cutter edge: Slight outward taper helps release clay. A 0.3 to 0.5 mm thin cutting edge works well.

Height: 10 to 15 mm so you can hold it comfortably.

Bottom lip: Add a 0.4 to 0.6 mm blunt edge for stability.

Slicer settings

Layer height: 0.12 to 0.20 mm for a smooth edge.

Walls/perimeters: 3 to 4 walls for strength.

Infill: 20 to 30 percent is enough.

Top layers: 3 to 5.

Material: PLA works fine. PETG if you need more durability.

Nozzle: Standard 0.4 mm.
4d1e70d8-5569-480a-83cd-ac6e5045d724-image.png

@apple_user_1762812784 Thank you for sharing your suggestion. Your feedback is genuinely valued, and I will relay it to our app development department for their careful consideration.

@Tina-j whether you are referring to the Christmas model?

1211112112121212121212121212121212121111121212121121211212111211212112111```11111``12121212121212122212121212121212