The model is not sticking to the build plate

[A Former User]

The model i am printing it is not sticking to the baseplate at all. It used to stick, everything printed well and now it suddenly stopped sticking. I already adjusted the z offset, it is close to the plate. I also tried the glue stick. What Else can I try?

[陆]

If you have adjusted the Z-offset but are still experiencing adhesion issues, it is possible that the proximity sensor is malfunctioning. To verify this, please enter the “Level Bed” function and check whether the hotend moves down three times.

If the leveling process completes correctly, the issue may stem from an incorrect Z-offset value. Typically, the optimal range falls between 0 and -2. You may find this

helpful.