Clay cutters
-
What are the best setting and how to work with them to make cutters for charms.
-
@Koralys-Torres said in Clay cutters:
What are the best setting and how to work with them to make cutters for charms.
- Modeling settings
Wall thickness: 0.8 to 1.2 mm for small charm cutters.
Cutter edge: Slight outward taper helps release clay. A 0.3 to 0.5 mm thin cutting edge works well.
Height: 10 to 15 mm so you can hold it comfortably.
Bottom lip: Add a 0.4 to 0.6 mm blunt edge for stability.
- Slicer settings
Layer height: 0.12 to 0.20 mm for a smooth edge.
Walls/perimeters: 3 to 4 walls for strength.
Infill: 20 to 30 percent is enough.
Top layers: 3 to 5.
Material: PLA works fine. PETG if you need more durability.
Nozzle: Standard 0.4 mm.
