Donald Trump

[Meighan Ryan]

Looking for a Donald Trump figure for a small 3d printer )

[陆]

@Meighan-Ryan I would like to provide you with some helpful information on how to get started with 3D printing using models available online. Here’s a step-by-step guide to assist you:

1. Download 3D Models: You can find a wide variety of 3D models to print from the following websites:

   • Thingiverse
   • Cults
   • Free3D

2. Extract the Model Files: Once you find a model you like, download the file to your computer. These files are typically compressed in ZIP format. To access the model, you will need to unzip the file, which will reveal the STL file. The STL file is the standard format used for 3D printing.

3. Prepare the Model for Printing: The next step is to prepare the model for printing, which involves slicing the STL file. This process converts the model into layers that your 3D printer can understand. Depending on your setup, you can do this using the following options:

   • Wiibuilder Software: You can learn how to use Wiibuilder software from this link on your computer.
   • Poloprint Cloud App: Alternatively, you can upload the STL file to the Poloprint Cloud app on your phone using this link.

Feel free to reach out if you have any questions or need further assistance with your 3D printing projects.

[Meighan Ryan]

@陆 is there a software program for this printer that you can use that not on a phone .

[陆]

@Meighan-Ryan Yes, wiibuilder. You can find it in the TF card.