@Lunarria-Nightraven

You can find it in wiibuilder.

@Louise-Davis-0 Could you plz offer some screenshot of the APP?

@Maddison-Egloff-Luce When you turn on the printer, check if it says “resume printing.” If it does, you can continue. If not, you’ll need to start the print job again from the beginning.

@Alan-Kelly Plus does involve some trade-offs in compatibility due to its quick-release design, as the hotend is custom-made and limited to a 0.4 mm nozzle. We will update the website description to clarify this, and we sincerely apologize for any confusion caused.

@apple_user_1775184850 Hi, you can get it here:
https://www.entina3d.com/pages/download-1

@Russellwarren30 said in Help loading .stl to profile:

Can't get .stl file to load iny profile. It fails with unknown error. I even tried to upload a file that I've uploaded successfully before but they will not upload now. It just gives a pop up window thay says unknown failure. Help please.

This issue was caused by a previous server upgrade. The upgrade has now been successfully completed, and the problem has been resolved.

You may continue using the service with confidence.

If you encounter any further issues, please feel free to contact us.

@Russellwarren30 To better understand the issue you’re experiencing, we would greatly appreciate it if you could share a few photos or short video clips showing the problem.

For example, this could include cases where the filament is not extruding from the nozzle, not sticking to the build plate, or the printer is unable to connect to Wi-Fi.

This will help us assess the situation more accurately and provide the most appropriate solution.

If you choose to share the files via Google Drive, please make sure the access permissions are set correctly so we can review them without delay.

@Melissa-Bernstein The ambient room temperature or the specific filament material can indeed influence the overall printing results. To achieve the most optimal outcome, we highly recommend printing the temperature tower file designed for PLA filament, which is provided at the end of this document.
https://szwzsw.zohodesk.com/portal/en/kb/articles/how-to-determine-the-optimal-printing-temperature-for-your-new-filament

The download link can be found at the bottom of the document. You may copy the files to your TF card to begin printing. If a computer is not available, please don’t worry—the packaging includes an adapter that allows you to transfer the files to the TF card using your phone, so you can continue with printing smoothly and without any difficulty.

@Alan-Kelly Here're the profile for Prusa and guide in case you need:
Download here

@3d_Masterz I would like to provide you with some helpful information on how to get started with 3D printing using models available online. Here’s a step-by-step guide to assist you:

1. Download 3D Models: You can find a wide variety of 3D models to print from the following websites:

   • Thingiverse
   • Cults
   • Free3D

2. Extract the Model Files: Once you find a model you like, download the file to your computer. These files are typically compressed in ZIP format. To access the model, you will need to unzip the file, which will reveal the STL file. The STL file is the standard format used for 3D printing.

3. Prepare the Model for Printing: The next step is to prepare the model for printing, which involves slicing the STL file. This process converts the model into layers that your 3D printer can understand. Depending on your setup, you can do this using the following options:

   • Wiibuilder Software: You can learn how to use Wiibuilder software from this link on your computer.
   • Poloprint Cloud App: Alternatively, you can upload the STL file to the Poloprint Cloud app on your phone using this link.

Feel free to reach out if you have any questions or need further assistance with your 3D printing projects.